Configuring Hwtacacs Schemes - HP 5120 EI Switch Series Configuration Manual

The failure ratio is generally small. If you see a trap message triggered due to a higher failure ratio,
check the configurations on the NAS and the RADIUS server and the communications between them.
Follow these steps to enable the RADIUS trap function:
To do...
Enter system view
Enable the RADIUS trap
function
Enabling the listening port of the RADIUS client
Follow these steps to enable the listening port of the RADIUS client:
To do...
Enter system view
Enable the listening port of the
RADIUS client
Displaying and maintaining RADIUS
To do...
Display the configuration information
of RADIUS schemes
Display statistics about RADIUS
packets
Display information about buffered
stop-accounting requests that get no
responses
Clear RADIUS statistics
Clear buffered stop-accounting
requests that get no responses

Configuring HWTACACS schemes

NOTE:
You cannot remove the HWTACACS schemes in use or change the IP addresses of the HWTACACS
servers in use.
Use the command...
system-view
radius trap { accounting-server-down |
authentication-error-threshold | authentication-
server-down }
Use the command...
system-view
radius client enable
Use the command...
display radius scheme [ radius-scheme-
name ] [ slot slot-number ] [ | { begin
| exclude | include } regular-
expression ]
display radius statistics [ slot slot-
number ] [ | { begin | exclude |
include } regular-expression ]
display stop-accounting-buffer {
radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name user-
name } [ slot slot-number ] [ | { begin
| exclude | include } regular-
expression ]
reset radius statistics [ slot slot-number
]
reset stop-accounting-buffer { radius-
scheme radius-server-name | session-
id session-id | time-range start-time
stop-time | user-name user-name } [
slot slot-number ]
30
Remarks
—
Required
Disabled by default
Remarks
—
Optional
Enabled by default
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view