HP 5120 EI Switch Series Configuration Manual page 41

HWTACACS configuration task list
Task
Creating an HWTACACS scheme
Specifying the HWTACACS authentication servers
Specifying the HWTACACS authorization servers
Specifying the HWTACACS accounting servers
Setting the shared keys for HWTACACS packets
Setting the username format and traffic statistics units
Specifying a source IP address for outgoing HWTACACS packets
Setting timers for controlling communication with HWTACACS servers
Displaying and maintaining HWTACACS
Creating an HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create an HWTACACS scheme and enter HWTACACS scheme view:
To do...
Enter system view
Create an HWTACACS scheme
and enter HWTACACS scheme
view
NOTE:

Up to 16 HWTACACS schemes can be configured.

A scheme can be deleted only when it is not referenced.
Specifying the HWTACACS authentication servers
Follow these steps to specify the HWTACACS authentication servers:
To do...
Enter system view
Enter HWTACACS scheme
view
Specify the primary
HWTACACS authentication
server
Specify the secondary
HWTACACS authentication
server
Use the command...
system-view
hwtacacs scheme hwtacacs-
scheme-name
Use the command...
system-view
hwtacacs scheme hwtacacs-scheme-
name
primary authentication ip-address [ port-
number ]
secondary authentication ip-address [
port-number ]
31
Remarks
Required
Required
Optional
Optional
Required
Optional
Optional
Optional
Optional
Remarks
—
Required
Not defined by default
Remarks
—
—
Required
Configure at least one
command.
No authentication server is
specified by default.