HP 5120 EI Switch Series Configuration Manual page 165

Accounting method : Required
Default authentication scheme
Default authorization scheme
Default accounting scheme
Domain User Template:
Idle-cut : Disabled
Self-service : Disabled
Authorization attributes:
Use the following command to view the port security configuration information:
<Switch> display port-security interface gigabitethernet 1/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
Index is 1, OUI value is 123401
Index is 2, OUI value is 123402
Index is 3, OUI value is 123403
Index is 4, OUI value is 123404
Index is 5, OUI value is 123405
GigabitEthernet1/0/1 is link-up
Port mode is userLoginWithOUI
NeedToKnow mode is disabled
Intrusion Protection mode is NoAction
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
After an 802.1X user gets online, you can see that the number of secure MAC addresses stored is 1. You
can also use the following command to view information about 802.1X:
<Switch> display dot1x interface gigabitethernet 1/0/1
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
EAD quick deploy is disabled
Configuration: Transmit Period
Quiet Period
Supp Timeout
Reauth Period
The maximal retransmitting times
EAD quick deploy configuration:
EAD timeout:
The maximum 802.1X user resource number is 1024 per slot
Total current used 802.1X resource number is 1
GigabitEthernet1/0/1
802.1X protocol is enabled
: radius:radsun
: radius:radsun
: radius:radsun
30 s, Handshake Period
60 s,
30 s,
3600 s
30m
is link-up
155
Quiet Period Timer is disabled
Server Timeout
2
15 s
100 s