HP 5120 EI Switch Series Configuration Manual page 51

Local accounting (local)—Local accounting is implemented on the access device. It is for counting

and controlling the number of concurrent users who use the same local user account; it does not
provide statistics for charging. The maximum number of concurrent users using the same local user
account is set by the access-limit command in local user view.
 Remote accounting (scheme)—The access device cooperates with a RADIUS server or HWTACACS
server for accounting of users. You can configure local or no accounting as the backup method to
be used when the remote server is not available.
By default, an ISP domain uses the local accounting method.
Before configuring accounting methods, complete the following tasks:
For RADIUS or HWTACACS accounting, configure the RADIUS or HWTACACS scheme to be
1.
referenced first. The local and none authentication methods do not require any scheme.
Determine the access mode or service type to be configured. With AAA, you can configure an
2.
accounting method for each access mode and service type, limiting the accounting protocols that
can be used for access.
Determine whether to configure an accounting method for all access modes or service types.
3.
Follow these steps to configure AAA accounting methods for an ISP domain:
To do...
Enter system view
Enter ISP domain view
Enable the accounting optional
feature
Specify the default accounting
method for all types of users
Specify the command accounting
method
Specify the accounting method for
LAN users
Specify the accounting method for
login users
Specify the accounting method for
portal users
Use the command...
system-view
domain isp-name
accounting optional
accounting default { hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | none | radius-scheme radius-
scheme-name [ local ] }
accounting command hwtacacs-
scheme hwtacacs-scheme-name
accounting lan-access { local | none |
radius-scheme radius-scheme-name [
local | none ] }
accounting login { hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | none | radius-scheme radius-
scheme-name [ local ] }
accounting portal { local | none |
radius-scheme radius-scheme-name [
local ] }
41
Remarks
—
—
Optional
Disabled by default
Optional
local by default
Optional
The default accounting method
is used by default.
Optional
The default accounting method
is used by default.
Optional
The default accounting method
is used by default.
Optional
The default accounting method
is used by default.