Failed To Retrieve Crls - HP 5120 EI Switch Series Configuration Manual

Use the ping command to check that the RA server is reachable.

Specify the authority for certificate request.

Configure the required entity DN parameters.


Failed to retrieve CRLs

Symptom
Failed to retrieve CRLs.
Analysis
Possible reasons include:
The network connection is not proper. For example, the network cable might be damaged or loose.

No CA certificate has been retrieved before you try to retrieve CRLs.

The IP address of LDAP server is not configured.

The CRL distribution URL is not configured.

The LDAP server version is wrong.

Solution
Make sure that the network connection is physically proper.

Retrieve a CA certificate.

Specify the IP address of the LDAP server.

Specify the CRL distribution URL.

Re-configure the LDAP version.

207