Displaying And Maintaining Ssl; Troubleshooting Ssl; Ssl Handshake Failure - HP 5120 EI Switch Series Configuration Manual

To do...
Create an SSL client policy and
enter its view
Specify a PKI domain for the SSL
client policy
Specify the preferred cipher suite
for the SSL client policy
Specify the SSL protocol version
for the SSL client policy
Enable certificate-based SSL
server authentication
NOTE:
If you enable client authentication on the server, you must request a local certificate for the client.

Displaying and maintaining SSL

To do...
Display SSL server policy
information
Display SSL client policy
information

Troubleshooting SSL

SSL handshake failure

Symptom
As the SSL server, the device fails to handshake with the SSL client.
Analysis
SSL handshake failure may result from the following causes:
The SSL client is configured to authenticate the SSL server, but the SSL server has no certificate or the

certificate is not trusted.
The SSL server is configured to authenticate the SSL client, but the SSL client has no certificate or the

certificate is not trusted.
Use the command...
ssl client-policy policy-name
pki-domain domain-name
prefer-cipher {
rsa_3des_ede_cbc_sha |
rsa_aes_128_cbc_sha |
rsa_aes_256_cbc_sha |
rsa_des_cbc_sha |
rsa_rc4_128_md5 |
rsa_rc4_128_sha }
version { ssl3.0 | tls1.0 }
server-verify enable
Use the command...
display ssl server-policy { policy-
name | all } [ | { begin | exclude
| include } regular-expression ]
display ssl client-policy { policy-
name | all } [ | { begin | exclude
| include } regular-expression ]
246
Remarks
Required
Optional
No PKI domain is configured by
default.
Optional
rsa_rc4_128_md5 by default
Optional
TLS 1.0 by default
Optional
Enabled by default
Remarks
Available in any view