HP 5120 EI Switch Series Configuration Manual page 62

Figure 16 Add an access device
# Add a charging policy.
Select the Service tab, and select Accounting Manager > Charging Plans from the navigation tree to enter
the charging policy configuration page. Then, click Add to enter the Add Charging Plan page and
perform the following configurations:
Add a plan named UserAcct

Select Flat rate as the charging template

In the Basic Plan Settings field, configure to charge the fixed fee of 120 dollars per month

In the Service Usage Limit field, set the Usage Threshold to 120 hours, allowing the user to access

the Internet for up to 120 hours per month
Adopt the default settings for other parameters and click OK to finish the operation.

Figure 17 Add a charging policy
# Add a service.
52