Hwtacacs - HP 5120 EI Switch Series Configuration Manual

Figure 5 Segment of a RADIUS packet containing an extended attribute
0
Type
Vendor-ID (continued)

HWTACACS

HW Terminal Access Controller Access Control System (HWTACACS) is an enhanced security protocol
based on TACACS (RFC 1492). Similar to RADIUS, it uses a client/server model for information exchange
between the NAS and the HWTACACS server.
HWTACACS mainly provides AAA services for Point-to-Point Protocol (PPP) users, Virtual Private Dial-up
Network (VPDN) users, and terminal users. In a typical HWTACACS application, some terminal users
need to log in to the NAS for operations. Working as the HWTACACS client, the NAS sends the
username and password of a user to the HWTACACS sever for authentication. After passing
authentication and being authorized, the user logs in to the device and performs operations, and the
HWTACACS server records the operations that the user performs.
Differences between HWTACACS and RADIUS
HWTACACS and RADIUS both provide authentication, authorization, and accounting services. They have
many features in common, like using a client/server model, using shared keys for user information
security, and providing flexibility and extensibility.
Table 3 Primary differences between HWTACACS and RADIUS
HWTACACS
Uses TCP, providing more reliable network
transmission.
Encrypts the entire packet except for the
HWTACACS header.
Protocol packets are complicated and authorization
is independent of authentication. Authentication and
authorization can be deployed on different
HWTACACS servers.
Supports authorization of configuration commands.
Which commands a user can use depends on both
the user level and AAA authorization. A user can
use only commands that are not only of, or lower
than, the user level but also authorized by the
HWTACACS server.
HWTACACS basic message exchange process
The following takes a Telnet user as an example to describe how HWTACACS performs user
authentication, authorization, and accounting.
7 15
Length
Vendor-Data
(Specified attribute value......)
......
23
Vendor-ID
Vendor-Type Vendor-Length
Table 3 lists their differences.
RADIUS
Uses UDP, providing higher transport efficiency.
Encrypts only the user password field in an
authentication packet.
Protocol packets are simple and the authorization
process is combined with the authentication process.
Does not support authorization of configuration
commands. Which commands a user can use
depends on the level of the user and a user can use
all the commands of, or lower than, the user level.
7
31