Configuring A Pki Domain - HP 5120 EI Switch Series Configuration Manual

To do...
Configure the locality for the
entity
Configure the organization name
for the entity
Configure the unit name for the
entity
Configure the state or province for
the entity
NOTE:

Up to two entities can be created on a device.

The Windows 2000 CA server has some restrictions on the data length of a certificate request. If the entity DN in
a certificate request goes beyond a certain limit, the server will not respond to the certificate request.

Configuring a PKI domain

Before requesting a PKI certificate, an entity needs to be configured with some enrollment information,
which is referred to as a PKI domain. A PKI domain is only intended for convenient reference by
applications like IKE and SSL, and only has local significance. A PKI domain configured on a device is
invisible to the CA and other devices.
A PKI domain defines these parameters:
Trusted CA—An entity requests a certificate from a trusted CA.

Entity—A certificate applicant uses an entity to provide its identity information to a CA.

RA—Generally, an independent RA is in charge of certificate request management. It receives the

registration request from an entity, checks its qualification, and determines whether to ask the CA to
sign a digital certificate. The RA only checks the application qualification of an entity; it does not
issue any certificate. Sometimes, the registration management function is provided by the CA, in
which case no independent RA is required. It is a good practice to deploy an independent RA.
URL of the registration server—An entity sends a certificate request to the registration server through

Simple Certification Enrollment Protocol (SCEP), a dedicated protocol for an entity to communicate
with a CA. This URL is also called the certificate request URL.
 Polling interval and count—After an applicant makes a certificate request, the CA might need a long
period of time if it verifies the certificate request manually. During this period, the applicant needs to
query the status of the request periodically to get the certificate as soon as possible after the
certificate is signed. You can configure the polling interval and count to query the request status.
IP address of the LDAP server—An LDAP server is usually deployed to store certificates and CRLs. If

this is the case, you must configure the IP address of the LDAP server.
 Fingerprint for root certificate verification—Upon receiving the root certificate of the CA, an entity
needs to verify the fingerprint of the root certificate—the hash value of the root certificate content.
This hash value is unique to every certificate. If the fingerprint of the root certificate does not match
the one configured for the PKI domain, the entity will reject the root certificate.
Use the command...
locality locality-name
organization org-name
organization-unit org-unit-name
state state-name
191
Remarks
Optional
No locality is specified by default.
Optional
No organization is specified by
default.
Optional
No unit is specified by default.
Optional
No state or province is specified
by default.