HP 5120 EI Switch Series Configuration Manual page 31

Task
Configuring RADIUS accounting-on
Specifying a security policy server
Configuring interpretation of RADIUS class attribute as CAR
parameters
Enabling the RADIUS trap function
Enabling the listening port of the RADIUS client
Displaying and maintaining RADIUS
Creating a RADIUS scheme
Before performing other RADIUS configurations, follow these steps to create a RADIUS scheme and enter
RADIUS scheme view:
To do...
Enter system view
Create a RADIUS scheme and
enter RADIUS scheme view
NOTE:
A RADIUS scheme can be referenced by multiple ISP domains at the same time.
Specifying the RADIUS authentication/authorization servers
Follow these steps to specify the RADIUS authentication/authorization servers:
To do...
Enter system view
Enter RADIUS scheme view
Specify the primary RADIUS
authentication/authorization
server
Specify the secondary
RADIUS
authentication/authorization
server
Use the command...
system-view
radius scheme radius-scheme-
name
Use the command...
system-view
radius scheme radius-scheme-name
primary authentication { ip-address [ port-
number | key string] * | ipv6 ipv6-address [
port-number | key string ] * }
secondary authentication { ip-address [ port-
number | key string] * | ipv6 ipv6-address [
port-number | key string ] * }
21
Remarks
Optional
Optional
Optional
Optional
Optional
Optional
Remarks
—
Required
No RADIUS scheme by default
Remarks
—
—
Required
Configure at least one
command.
No
authentication/authorizat
ion server is specified by
default.