Scanning During Warm-Up - Konica Minolta BIZHUB C203 User Manual

Before making copies
Note
A job can also be queued while the machine is warming up after the [Power] (auxiliary power) key is
turned on. For details, refer to
After the machine has finished warming up, the scanned image will be printed.
Refer to
1.3.2

Scanning during warm-up

1
Press the [Power] (auxiliary power) key.
– For details on turning on the machine, refer to
The indicator on the [Start] key lights up in orange.
After the warm-up message is displayed, the Basic screen appears. The indicator on the [Start] key
lights up in blue.
2
Check that the message "Warming up. Ready to scan." appears on the touch panel.
3
Position the original to be copied.
– For details on positioning the original, refer to
4
Specify any other desired copy settings.
5
Using the keypad, specify the desired number of copies.
– For details on specifying the number of copies, refer to
6
Press the [Start] key.
The original is scanned, and the job is added to the list of queued jobs.
– If the "Copy Operating Screen" parameter in Utility mode was set to "Yes", touch [Next Copy Job]
to display the Basic screen.
– After the machine has finished warming up, the jobs will automatically be printed.
C353/C253/C203
"Scanning during warm-up" on page
"Main unit" on page 5-2
for warm-up time.
"Turning off the machine" on page
"Feeding the original" on page
"General copy operation" on page
1-24.
1-25.
2-6.
1
2-2.
1-24