Setting The "Message Display Time" Function - Konica Minolta BIZHUB C203 User Manual

Additional copy operations
3
Select whether or not the message is displayed.
– To cancel changes to the settings, press the [Reset] key. All changes to the settings are canceled.
4
Touch [OK].
The Accessibility Setting screen appears again.
5
Touch [Close] or press the [Accessibility] key.
The Basic screen appears again.
Note
The Enlarge Display mode is compatible with basic copy, scanning and fax functions. With the Enlarge
Display mode, text and illustrations are displayed at a larger size so that they can be seen more easily.
For details on the Enlarge Display mode, refer to the User's Guide [Enlarge Display Operations].
If "OFF" is selected in the Enlarge Display Mode Confirmation screen, the screen is not displayed.
3.7.7

Setting the "Message Display Time" function

It is possible to specify the length of time for displaying warning messages, which appear, for example, when
an incorrect operation is performed.
As the factory default, "3 seconds" is selected.
1
Display the Accessibility Setting screen, and then touch [↓] to display the next screen.
– For details on displaying the Accessibility Setting screen, refer to
Setting screen" on page
2
Touch [Message Display Time] or press the [1] key in the keypad.
C353/C253/C203
3-19.
"Displaying the Accessibility
3
3-27