Checking Job Settings - Konica Minolta BIZHUB C203 User Manual

Managing jobs
– To quit deleting the job, touch [No], and then touch [OK].
The screen displayed before [Delete] was touched appears again, and the job is deleted from the
Current Jobs list.
5
Touch [Close] or press the [Reset] key.
The Basic screen appears again.
Note
If user authentication settings have been applied and the machine is set so that jobs cannot be deleted
by other users, the job is not deleted.
A job being performed can also be deleted by selecting the job in the sub display area, then touching
[Delete].
10.2.2

Checking job settings

Job settings for stored jobs, jobs being printed, jobs queued to be printed and held jobs can be checked.
1
Touch [Job List] in the left panel, and then touch [Job Details].
The Job List screen appears.
2
Display the list containing the job whose settings are to be checked.
3
Select the job to be deleted, and then touch [Check Job Set.].
– If an incorrect job was selected, select a different job or touch the button for the selected job again
to deselect it.
– The contents and number of Job Settings screens differ depending on the job that was selected.
The upper number to the left of [←Back] indicates the number of the currently displayed screen.
–
The lower number indicates the total number of screens.
To display the previous screen, touch [←Back]. To display the next screen, touch [Forward→].
–
The Check Job Settings screen appears.
C353/C253/C203
10
10-7