Inserting Paper Between Ohp Transparencies ("Ohp Interleave" Function) - Konica Minolta BIZHUB C203 User Manual

Application functions
7.2 Inserting paper between OHP transparencies ("OHP Interleave"
function)
In order to prevent copies printed onto OHP transparencies from sticking together as a result of the heat that
is produced during copying, paper (interleaves) can be inserted between the transparencies
0 No Finishing setting can be used.
1
Position the original to be copied.
– For details on positioning the original, refer to
– For details on loading OHP transparencies, refer to
page 6-3
2
In the Basic screen, touch [Color], and then touch [Black].
– Printing on OHP transparencies is possible only in black.
3
Load the OHP transparencies into the bypass tray, and load the interleaf paper into the desired paper
tray.
– Use interleaf paper with the same size as the OHP transparencies.
4
Select [Transparency] as the paper type for the bypass tray, and then touch [OK].
– For details on specifying the paper type settings, refer to
on page
C353/C253/C203
E F G H
E F G H
E F G H
and
"Loading paper into the bypass tray" on page
6-15.
E F G H E F G H
E F G H E F G H
E F G H E F G H
"Feeding the original" on page
"Paper types and paper capacities" on
1-45.
"Specifying a setting for special paper"
7
2-6.
7-21