Care of the machine
9.1.5
Original pad
%
Clean the original pad by wiping it with a soft cloth
dampened with a mild household detergent.
Reminder
Never use solvents, such as benzene or thinner, to clean the original pad.
9.1.6
Electrostatic charger wire
If the electrostatic charger wire is dirty, streaks will appear though the printed images. If this occurs, follow
the procedure described below to clean the electrostatic charger wire.
1
Open the machine's front door.
2
Slowly pull out the charger-cleaning tool as far as
possible.
Next, slowly push in the charger-cleaning tool as far as
possible.
Repeat the above operations three times.
3
Securely insert the charger-cleaning tool, and then close the front door.
C353/C253/C203
9
9-4