Replace Jammed Originals If Restarting Job - Lexmark MX71x Service Manual

Replace jammed originals if restarting job

Try one or more of the following:
•
Touch Cancel job to clear the message and cancel the scan job.
•
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
• Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
•
Touch Finish job without further scanning to end the last successful scan job.
•
Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace last scanned page and jammed originals if restarting job.
Try one or more of the following:
• Touch Cancel job to clear the message and cancel the scan job.
•
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
•
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
• Touch Finish job without further scanning to end the last successful scan job.
•
Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace maintenance kit, 0 estimated pages remain [80.xy]
The printer is scheduled for maintenance. For more information, visit the Lexmark support Web site at
http://support.lexmark.com
Replace missing fuser [80.xx]
1
Install the missing fuser. For more information, see the instruction sheet that came with the replacement part.
2
From the printer control panel, touch Continue to clear the message.
Replace roller kit [81.xx]
Try one or more of the following:
•
Replace the roller kit. For more information, see the instruction sheet that came with the part.
•
From the printer control panel, select Continue to clear the message and continue printing.
Replace separator pad
Try one or more of the following:
• Replace the separator pad. For more information, see the instruction sheet that came with the supply.
•
From the printer control panel, touch Ignore to clear the message.
or contact your service representative, and then report the message.
Diagnostic information
232
7463