Toner smear check
Actions
Step 1
Check if the fuser screws are tightly fastened.
Are they tightly fastened?
Step 2
Check the following fuser components for wear or damage:
•
Gears
•
Exit rollers
•
Heat belt or hot roller
Are they free of damage?
Step 3
Check the cables on the LVPS.
Are the connections on the above component properly connected?
Paper jams
Avoiding jams
Load paper properly
•
Make sure paper lies flat in the tray.
Yes
Go to step 2.
Go to step 3.
Contact the next level
of support.
Diagnostic information
74
7463
No
Reseat the fuser, and
tighten the screws.
Replace the fuser. See
"Fuser removal" on
page
556.
Replace the LVPS. See
"LVPS removal" on
page
445.