Error Messages - Lexmark MX71x Service Manual

324 error messages

321–345 error messages
Error code Description
324.57 No encoder feedback detected from the tray 2 (HCIT)
lift motor.
324.58 Motor stop error—the tray 2 (HCIT) lift motor kept on
running some time after the motor was commanded
to stop.
324.59 The tray 2 (HCIT) lift motor went over the normal
speed
325 error messages
321–345 error messages
Error code Description
325.60 Hardware Error—tray 2 board ID unknown
325.61 Hardware Error—tray 2 option type unknown
325.62 Hardware Error—tray 2 product ID unknown)
325.63 Hardware Error—tray 2 sensors are not plugged on
the board
325.64 Hardware Error—tray 2 lift plate failed to reach its
home position
331 error messages
321–345 error messages
Error code Description
331.51 No encoder feedback detected from the tray 3
pick/lift motor.
331.52 Motor stop error—the tray 3 pick/lift motor kept on
running some time after the motor was commanded
to stop.
331.53 The tray 3 pick/lift motor went over the normal speed
Action
Go to "HCIT lift drive motor failure service check"
on page
Action
Go to "250/550-sheet controller board failure
service check" on page
Go to "HCIT lift plate failure service check" on
page 299.
Action
Go to "250/550-sheet media feeder failure service
check" on page
Diagnostic information
288
298.
295.
291.
7463