Paper Jams - Lexmark MX71x Service Manual

Action
Step 9
Check the connectors on the controller board. If damaged, then replace
the controller board. See "HCIT controller board removal" on page
Reseat all connectors on the controller board, then POR the machine.
Does the error remain?
Step 10
Replace the tray.
Does the error remain?
Step 11
Replace the drawer.
Does the error remain?

250 paper jams

[x]‑page jam, clear manual feeder. [250]
1
From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2
Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
3
Reload paper into the multipurpose feeder.
Yes
Replace the controller
board. See
controller board
676.
removal" on page
676.
If the error remains,
then go to step 10.
Go to step 11.
Contact the next level
of support.
Diagnostic information
136
No
The problem is solved.
"HCIT
The problem is solved.
The problem is solved.
7463