Replace Jammed Originals If Restarting Job - Lexmark 7527-415 CX410e User Manual

Color laser printer
Hide thumbs Also See for 7527-415 CX410e:
Table of Contents

Advertisement

Troubleshooting
Select Finish job without further scanning, and then press
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
Select Restart Job, and then press
Select Cancel Job, and then press
Remove defective disk [61]
Remove and replace the defective printer hard disk.
Replace defective [color] cartridge [31.xy]
Replace the defective toner cartridge to clear the message. For more information, see the instruction sheet that came
with the supply.
Note: If you do not have a replacement toner cartridge, then see the "Ordering supplies" section of the User's Guide.
Replace defective [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the defective imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then visit our Web site or contact the place where you
purchased the printer.

Replace jammed originals if restarting job.

From the printer control panel, try one or more of the following:
Select Scan from automatic feeder, and then press
last successful scan job.
Select Scan from flatbed, and then press
last successful scan job.
Select Finish job without further scanning, and then press
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
Select Restart Job, and then press
Select Cancel Job, and then press
Replace maintenance kit, 0 estimated pages remain [80.xy]
The printer is scheduled for maintenance. Contact customer support or your service representative, and then report
the message.
to restart the scan job with the same settings from the previous scan job.
to clear the message and cancel the scan job.
to continue scanning from the ADF immediately after the
to continue scanning from the scanner glass immediately after the
to restart the scan job with the same settings from the previous scan job.
to clear the message and cancel the scan job.
to end the last successful scan job.
to end the last successful scan job.
250

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7527-436 cx410de

Table of Contents