Table of Contents
Advertisement
Tally Dascom 2610
10.2.2
Paper Handling Problems and Solutions
Problem
Paper cannot be loaded or
fed.
Paper jams while loading.
Paper jams while printing.
Paper slips off the forms
tractors or the perforated
holes of the paper tear
during printing.
Paper width error.
10.2.3
Operating Problems and Solutions
Problem
The power does not turn on.
• Make sure that the paper select lever located on the
top right of the printer is set correctly.
• Turn off the printer and remove the jammed paper.
Remove any obstructions from the paper path.
• Make sure that the Print Gap lever is set for the
thickness of your paper.
• Make sure that the paper is not folded, creased, or
torn.
• Make sure that the left and right tractors are set so
that the continuous forms are stretched tightly.
• Turn off the printer and remove the jammed paper.
Remove any obstructions from the paper path.
• Make sure that the Print Gap lever is set for the
thickness of your paper.
• For continuous forms, make sure that the incoming
and outgoing paper stacks are correctly placed. Paper
should feed straight.
• Make sure that the forms tractors are positioned
correctly for the width of your paper and that the
perforated holes of the paper fit directly over the tractor
pins.
• The sensor interprets dark areas with a width of 13
mm or more as the right-hand paper edge.
If the sensor does not detect any black area, the
maximum possible printing width is used as the
printable area.
If there is a sensor malfunction (e.g. because of dirt, a
defect or misinterpretation of the paper width) it is
necessary to deactivate the APW function (APW=Off),
since otherwise the printout will be too narrow or there
will be no printout at all. In this case contact your
service technician.
• Check whether the mains voltage is correct.
• Make sure that the power cord is securely connected
to both the printer and the mains power outlet.
• Make sure that the power outlet is functional. If not ,
use other outlet.
• Turn the power off. Wait a minute and then turn the
printer on again. If the printer still has no power, contact
your dealer.
117
Solution
Solution
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 2610 and is the answer not in the manual?
Questions and answers
Hello there, I had problem with printer tally dascom 2610+ It can't print invoice But when we test print it work Please. Help
The Dascom 2610 printer may be unable to print invoices despite successful test prints due to one or more of the following reasons:
- The interface cable may not be securely connected to both the printer and the computer.
- The printer driver selected in the software may not match the emulation setting on the printer.
- Incorrect software or printer settings may be used.
- There may be an issue with the computer or interface settings.
- The paper select lever may be in the wrong position, causing the printer to go offline.
Check and correct these settings to resolve the issue.
This answer is automatically generated