Messages Lcd Panel - Dascom 2610 User Manual

Tally Dascom 2610
5.5.2

Messages LCD Panel

LCD Messages
Eject error
Hardware Alarm
Head hot
Initializing
Load error
Loading default
Load paper from
Parity error
Park position
Press any key
Selftest
Tear Paper off
Switch Paper Lever
The printer cannot eject the paper/advance it to
park position.
Internal hardware error, contact your dealer or
service technician.
The print head is too hot. The printer will reduce
its print speed.
This message appears during the printer's
initializing phase after switching on the printer.
The printer fails to load the paper.
Factory defined parameters will be reloaded in all
available menus after switching on the printer.
The printer has detected paper end during
operation/printer was switched on with no paper
loaded.
A parity error during data transmission is
indicated.
Printer was switched on with no paper loaded.
The user is requested to press any key.
After power-on, the printer executes a short
hardware self-test.
The user is requested to tear off paper which has
been advanced to the tear.
Choose correct paper path. Turn paper lever
47
Meaning