Dascom 2610 User Manual page 34

Tally Dascom 2610
Detailed descriptions of the above functions:
◆ Speed
If LQ font is currently set in the configuration, lighting up of the
printouts; turning off
【
If Draft is currently set in the configuration, lighting up of the
turning off Speed indicates Draft printouts.
【 】
◆ Setup Menu
See Chapter 5 for details.
◆ Clear Buffer and Reset
The printer has high capacity storage (buffer) to store the data from the host computer. Sometimes it is
required to halt the printing to clear a fault. Resuming the printing at this point may cause erratic
printouts because some of the un-processed data in the buffer may be truncated. Therefore, it is
recommended clearing the buffer after the recovery with following procedures: (Turning off the printer
is an alternative)
1) Terminate the print job in the host.
2) Press the Online
【 】
resides in the buffer.
3) Hold Online and
【 】
automatically warm boot.
4) Probably you need to repeat step 2-3 times as the print job in the host spooler may be very large.
Speed indicates LQ printouts.
】
key to bring the printer off-line. The printing will stop, but un-processed data still
Load/Eject keys simultaneously. The buffer will be cleared and the printer will
【 】
Speed
【 】
Speed LED forces HS Draft printouts;
【 】
21
LED forces NLQ font