Table of Contents
Advertisement
Tally Dascom 2610
Width
Width=13.6Inch
Width=8Inch
Width=13.2Inch
Eject
Eject=Top
Eject=Front
Barcode Off On
Barmode Unsecured
Secured
FFmode Off On
LeftMrg
Wide:
Narrow: LeftMrg=0 - 78/10"
RightMrg Wide:
Narrow: RightMrg=2 - 80/10"
LeftMrg=0 - 134/10"
RightMrg=2 - 136/10"
Selects the line length in inches. With the
setting of 8 Inch, the printer operates like
a printer with a width of only 8 inches.
This is valid for single sheet mode only. It
controls the exit direction of the friction
sheet paper.
With this function selected it is possible
to print different barcodes and LCP
(Large Character Printing).
Allows printing of normal characters on
the left and right of the barcode.
Specifies whether a form feed is to be
performed when the paper reaches the
top print line.
The left print margin can be set to a fixed
value.
The right print margin can be set to a
fixed value.
41
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 2610 and is the answer not in the manual?
Questions and answers
Hello there, I had problem with printer tally dascom 2610+ It can't print invoice But when we test print it work Please. Help
The Dascom 2610 printer may be unable to print invoices despite successful test prints due to one or more of the following reasons:
- The interface cable may not be securely connected to both the printer and the computer.
- The printer driver selected in the software may not match the emulation setting on the printer.
- Incorrect software or printer settings may be used.
- There may be an issue with the computer or interface settings.
- The paper select lever may be in the wrong position, causing the printer to go offline.
Check and correct these settings to resolve the issue.
This answer is automatically generated