Table of Contents
Advertisement
Tally Dascom 2610
3
Installing the paper
The printer can handle either single sheets or continuous forms. The printer is able to print up
to 5 copies (original plus 5).
To ensure the print quality and protect the print head, set a proper print gap by the
gap lever (see 3.1) for the form thickness and do not load folded, damaged,
wrinkled, or curled paper.
3.1
Adjusting the print gap for various form thicknesses
The print gap lever is on the left side of the printer inside the top cover.
Take care to adjust the print gap lever to a suitable position whenever you change the number
of copies being printed. Using the wrong print gap may cause print head damage or paper
jams.
The recommended gap lever position for different form thickness is:
The position "Ribbon" only is suitable for loading the ribbon. When the lever is set higher than
appropriate it will result in poor print. The ribbon and head life will be shortened.
Paper type
1-part
Original + 1 copy
Original + 2 copies
Original + 3 copies
Original + 4 copies
Original + 5 copies
Lever position
1
2
3
4
5
6
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 2610 and is the answer not in the manual?
Questions and answers
Hello there, I had problem with printer tally dascom 2610+ It can't print invoice But when we test print it work Please. Help
The Dascom 2610 printer may be unable to print invoices despite successful test prints due to one or more of the following reasons:
- The interface cable may not be securely connected to both the printer and the computer.
- The printer driver selected in the software may not match the emulation setting on the printer.
- Incorrect software or printer settings may be used.
- There may be an issue with the computer or interface settings.
- The paper select lever may be in the wrong position, causing the printer to go offline.
Check and correct these settings to resolve the issue.
This answer is automatically generated