Table of Contents
Advertisement
Tally Dascom 2610
ETH-INT
CG-Tab
Graphic DLL Italic
CharSet
Extended Standard
E-USASCII
Country
E-UK
E-Italy
E-Norway
E-L.America
ISO8859-1
ISO8859-5
ISO8859-15
Abicomp
French
Swedish
Portuguese
IP-Addr
Octets 1-4
0 to 255
Gateway Octets 1-4
0 to 255
Subnet
Octets 1-4
0 to 255
IP Get M DHCP BOOTP
Static
Off On
Banner
EthSpeed Auto-Sense
10Mbit Half
10Mbit Full
100Mbit Half
100Mbit Full
E-France
E-German
E-Denmark I
E-Sweden
E-Spain I
E-Japan
E-Denmark II
E-Spain II
E-Korea
E-Legal
ISO8859-1 SAP ISO8859-2
ISO8859-7
ISO8859-9
ELOT-928
BRASCII
Roman8
US-ASCII
German
Italian
Norwegian
Spanish
Greek DEC
Cro-ASCII
Input of the IP address of the printer
This menu level offers the possibility to
set the IP address, which is divided into
four digit groups (octet 1 to 4).
Input of the Gateway address of the
printer.
Input of the Subnet mask address of the
printer.
Selects the way of administrating the IP
address.
Specifies whether a banner page is to be
printed out, when using the LPD/LPR
protocol.
The transmission speed is detected
automatically.
Sets the transmission speed to 10 MBit
half duplex per second.
Sets the transmission speed to 10 MBit
full duplex per second.
Sets the transmission speed to 100 MBit
half duplex per second.
Sets the transmission speed to 100 MBit
full duplex per second.
Only available for Epson
LQ-2550/LQ-2170 emulation. Either the
Epson character set Italics or the IBM
graphics character set or a DLL
(download) character set, as defined
before, can be activated in the code
range from hex. A0 to hex. FE.
Selects the IBM standard characters or
the extended IBM characters.
Selects the national character set. These
character sets can be used according to
the selected emulation.
38
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 2610 and is the answer not in the manual?
Questions and answers
Hello there, I had problem with printer tally dascom 2610+ It can't print invoice But when we test print it work Please. Help
The Dascom 2610 printer may be unable to print invoices despite successful test prints due to one or more of the following reasons:
- The interface cable may not be securely connected to both the printer and the computer.
- The printer driver selected in the software may not match the emulation setting on the printer.
- Incorrect software or printer settings may be used.
- There may be an issue with the computer or interface settings.
- The paper select lever may be in the wrong position, causing the printer to go offline.
Check and correct these settings to resolve the issue.
This answer is automatically generated