Dascom 2610 User Manual page 49

Tally Dascom 2610
Prestige NLQ Prestige LQ
Script LQ
OCR-A NLQ
Courier I NLQ Courier I LQ
Souvenir NLQ Courier I PS NLQ Gothic NLQ
Souvenir LQ
10 CPI, 12 CPI, 15 CPI, 17.1 CPI, 20
CPI
CPI, 5 CPI, 6 CPI, 7.5 CPI, 8.6 CPI.
LPI 6 LPI, 8 LPI, 12 LPI, 2 LPI, 3 LPI, 4 LPI. Sets the lines per inch (line density). The
Skip Skip=0.0 Inch,
Skip=0.5 Inch, Skip=1.0 Inch,
Skip=1.5 Inch, Skip=2.0 Inch,
Skip=2.5 Inch, Skip=3.0 Inch,
Skip=3.5 Inch.
ESCChar ESC ESC+$$
Emulate Epson LQ-2550
Epson LQ-2170
IBM Propr. XL24 Epson FX
IBM ProXL24+AGM MTPL
Bidir=On Bidir=Off
Bidir
I/O Serial
Script NLQ
OCR-B NLQ OCR-B LQ
OCR-A LQ Orator NLQ
Orator LQ
Courier I PS LQ Gothic LQ
Baud Baud=9600
Baud=19200
Baud=600
Baud=1200
Baud=2400
Baud=4800
Sets the characters per inch (character
pitch). The higher parameter the smaller
character spacing.
higher parameter the smaller line spacing
(random LPI can be selected via the ESC
sequences).
Skips the perforation; 7 different values
(in inches) can be defined.
Selects the start signal for control
sequences. Setting ESC: Only character
Escape can be used. Setting ESC+$$:
Character Escape or alternatively two
$ characters ($$) can be used.
Selects the emulation. When a printer
understands the control set written for
another printer type, it is said to emulate
the other printer.
Setting On: Printer prints in both
directions (bidirectional).
Setting Off: Printer prints only in one
direction (from left to right).
Selects the data transmission rate (baud
rate) (baud=bit per second).
36