Table of Contents
Advertisement
Tally Dascom 2610
5.2.2
Menu configurations
Every printer is shipped with factory default settings. Basic settings such as emulation,
character size, form length etc., which many applications make use of, are set. At the end of
this chapter you will find a menu printout which shows you the printer's default settings.
Your printer allows you to set and use five independent menu configurations. If one of your
applications, for example, requires an IBM printer while another program works better with an
EPSON printer, you can set an IBM emulation configuration with the desired settings, and set
the second configuration as an EPSON emulation.
The active menu is always the one you used last. When you switch on the printer for the very
first time, menu no. 1 is loaded. Menu no.1 only remains active until you load another menu.
The last active menu is stored even after the printer is switched off and is reloaded
automatically when the printer is switched on again.
For example, to change from menu no. 1 to menu no. 3:
If changing menus it is possible that the printer initializes due to different
emulation settings.
Press Setup key.
Press Menu (1) key.
Press Menu (3) key.
Now the following message appears in the LC display:
Now press the < (2) or > (3) key repeatedly until Load Menu=3
appears.
Then select menu no. 3 as the current setting using the Set key
(1). The currently active setting is marked with an asterisk (*).
30
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 2610 and is the answer not in the manual?
Questions and answers
Hello there, I had problem with printer tally dascom 2610+ It can't print invoice But when we test print it work Please. Help
The Dascom 2610 printer may be unable to print invoices despite successful test prints due to one or more of the following reasons:
- The interface cable may not be securely connected to both the printer and the computer.
- The printer driver selected in the software may not match the emulation setting on the printer.
- Incorrect software or printer settings may be used.
- There may be an issue with the computer or interface settings.
- The paper select lever may be in the wrong position, causing the printer to go offline.
Check and correct these settings to resolve the issue.
This answer is automatically generated