Registering The Terminal - Hughes HN9800 Installation Manual

Registering the terminal

Chapter 5 • Commissioning and registering the satellite modem
38
1039707-0001 Revision A
and progresses until completion. Normally, there is no need for intervention.
Figure 23 shows the commissioning tasks completed.
Figure 23: Commissioning tasks completed
Click Start Registration to proceed.
The next step in the process is activating or registering the terminal. The terminal
registration process associates the SAN with the ESN.
1. On the Registration screen enter the SAN and PIN as shown in Figure 24.
Figure 24: Registration screen
2. Click Continue.
3. The registration Welcome screen appears as shown in Figure 25.