Red Flag Indicator; Features A Customer May Not See - Hughes HN9800 Installation Manual

Features a customer may not see

On any of these screens, if a parameter name or the current value of a parameter is
underlined, you can click the name or value to see an explanation of it.
Figure 34: Format of status and information screens
Refer to sections below for an explanation for the parameters unique to each screen.
• System Status page on page 48
• Reception Information page on page 49
• Transmission Information page on page 51
• System Information page on page 53

Red flag indicator

On the status and information screens, a red flag next to a value indicates a problem
related to the parameter listed in the same row where the flagged value appears. The
flagged value appears in the right column; the parameter appears in the left column.
The value indicates the current state of the parameter. If you see a red flag, you can
click the underlined parameter value in the right column to see additional
information about the problem.
A customer may see descriptions of certain features in the satellite modem user
guide that do not appear on their System Control Center screens. This is because
some features may be enabled or disabled by the NOC depending on the customer's
service plan or customer-specific requirements. If a feature is not enabled the screen
or screens for that feature or links to it do not appear. Features that may be enabled
or disabled by the NOC are:
• Web Acceleration
• Problem Troubleshooting
• Detailed Problem Statistics
Chapter 6 • System Control Center
1039707-0001 Revision A
47