Setting The "Center Staple Position" Function - Konica Minolta bizhub c350 User Manual

10

Setting the "Center Staple Position" Function

This function is used to make fine adjustments to the center stapling position and
the folding position when binding. (The default setting is 0 mm.)
Before making the adjustment, use the "Booklet" and "Bind" settings to make a copy
sample.
Perform the adjustment while checking the sample that was created.
Reference
For details on the "Booklet" and "Bind" setting, refer to "Selecting Copy Settings"
on page 3-37.
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, type in the administrator code.
❍
Touch [Enter].
4
Touch [Expert User Mode].
5
Touch [Center Staple
Position].
10-86
10.10 Specifying Expert User Mode Functions
C350