Konica Minolta bizhub c350 User Manual page 277

10
6
Using the keypad, type
in the desired length of
time (between 15 and
240 minutes).
7
Touch the appropriate
key to specify whether
or not the machine
enters Sleep mode
when a job is stored in
the memory or a locked
job is programmed.
8
Touch [Enter].
9
Touch [Exit], and then touch [Exit] in the Utility screen.
The Basic screen appears again.
Condition
To set the machine so that it will not enter Sleep mode, set the "Disable Sleep
Mode" function on the Admin. Set. screen in Administrator mode to "Yes".
If the "Disable Sleep Mode" function is set to "Yes", [No] appears in the Sleep
screen.
For details on the "Disable Sleep Mode" function, refer to "Setting the "Disable
Sleep Mode" Function" on page 10-34.
10-14
10.4 Specifying Default Settings (User's Choice: 1 Functions)
C350