Konica Minolta bizhub c350 User Manual page 90

2.10 Feeding the Document
6
Select the desired copy settings, and then press the [Start] key.
Scanning of the document begins.
Additional Information
When using a setting where multiple document pages are to be scanned,
such as when making 2in1 copies, the message show below appears after
step 6.
To continue scanning, remove the document, position the next page of the
document on the original glass, and then press the [Start] key.
After all pages of the document have been scanned, touch [Finish], and then
press the [Start] key.
The copy job is queued for printing.
7
Lift open the original cover, or the reverse automatic document feeder if it is
installed, and then remove the document.
8
Close the original cover, or the reverse automatic document feeder if it is
installed.
C350
2
2-47