Konica Minolta bizhub c350 User Manual page 425

11 11.5 When the Message "Staple mode cannot be used." Appears
9
Clockwise turn the misfeed-
clearing dial in the folding
section. Feed out into the lower
output tray the paper that could
not be fed out in step 8, and then
pull out the paper.
10
Slowly pull out the stapler unit as
far as possible.
Turn misfeed-clearing dial ➁
11
clockwise until the cartridge
removal indicators are aligned.
The staple cartridge moves to a
position from where it can be
removed.
Hint
If the dial is turned too far,
turn it counterclockwise to
adjust it so the cartridge
removal indicators are
aligned.
11-56
Removal
position
C350