9.1 Cleaning
Electrostatic Charger
If the electrostatic charger is dirty, streaks will appear though the copies. If this
occurs, clean the charger according to the following procedure.
1
Open the machine's front door.
2
Slowly pull out the charger-
cleaning tool as far as possible.
Next, slowly push in the charger-
cleaning tool as much as
possible.
Repeat the above operations
three times.
Perform this same operation to
clean each of the other
electrostatic chargers.
3
Securely insert each charger-cleaning tool, and then close the front door.
C350
9
9-5