Setting The "Administrator Code Change" Function - Konica Minolta bizhub c350 User Manual

10.8 Administrator Settings

Setting the "Administrator Code Change" Function

This function is used to change the administrator code.
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, type in the administrator code.
❍
Touch [Enter].
4
Touch [Admin. Set.].
5
Touch [3/4].
6
Touch [Administrator
Code Change].
7
Use the keypad to type
in the currently
specified administrator
code, and then touch
[Enter].
❍ If [Cancel] is
touched, the
administrator code
is not changed. The
screen shown in
step 6 appears
again.
C350
10
10-59