Recalling A Copy Program - Konica Minolta bizhub c350 User Manual

10.2 Programming/Recalling Copy Programs

Recalling a Copy Program

The stored copy programs can be recalled to be used again, as necessary.
1
Load the document into the reverse automatic document feeder or position it on
the original glass.
2
Press the [Utility] key.
3
Touch [Copy Program Recall].
4
Touch the key for the
number of the program
that you wish to recall.
The copy program
settings appear.
5
Check that the copy
program settings that
appear are the ones
that you wish to use,
and then touch [Enter].
The copy settings
change to the ones that
are recalled.
❍
If the displayed
copy program
settings are not the
ones that you wish
to use, touch [Menu].
The screen shown in step 4 appears again. Touch the key for the correct
number of the program that you wish to recall.
6
Press the [Start] key.
The copy job is queued.
C350
10
10-7