When The Message "Remove Punch Scraps." Appears; Display In Enlarge Display Mode - Konica Minolta bizhub c350 User Manual

11.6 When the Message "Remove Punch Scraps." Appears

11.6 When the Message "Remove Punch Scraps."
Appears
If the punch kit PK-501 is attached to finisher FS-601, the following message will
appear when the hole-punch waste container is full (If it can be emptied by the
user).

Display in Enlarge Display Mode

If the hole-punch waste container is full,
panel.
C350
appears in the screen on the touch
11
11-59