Sewing Machine Reference Position Adjustment Method - Brother S-7000DD Service Manual

2. FUNCTION SETTINGS (OPERATION PANEL)

2-10. Sewing machine reference position adjustment method

Change to sewing machine reference position adjustment mode
1
(While pressing the B
Select the adjustment item
2
(Adjustment
item name)
• "1 Sewing machine reference position" is
adjusted at the time of shipment from the factory.
• If you would like to change only the stop positions, make adjustments to "2 Needle up stop position" or "3 Needle
down stop position".
NOTE:
When an adjustment value is changed, the needle up and needle down signal positions will change. Other
settings such as solenoid operation timing and needle up/needle down stop positions will change in line with
this.
3 Change to the adjustment value display
Change the adjustment value
4
(Adjustment value)
Confirm the adjustment value
5
6
39
key (1), press the power ON switch.)
(Adjustment value)
• When the D
• When the C
* If the adjustment value is different from the original value, the adjustment value
will flash.
* A setting value of "10" corresponds to an angle of rotation of approximately 10°
for the upper shaft.
(Adjustment item name)
Sewing machine reference position adjustment mode will be exited
and normal operation will be possible.
"MORG" will appear in the display (2).
Adjustment item
Sewing machine reference
1 position (Adjustment when
motor is replaced)
Needle up stop position
2
(during individual adjustment)
Needle down stop position
3
(during individual adjustment)
* If you press the SEL key once more, the display will return to
the adjustment item display.
key is pressed, the setting value increases by 1.
key is pressed, the setting value decreases by 1.
The setting value will be stored and the display
will return to the setting item.
NOTE:
Any changed settings will take effect after
sewing
adjustment mode has been exited.
S-7000DD
Display
Adjustment Adjustment
item name value
[MORG] -20° - 20°
[UPOS] -5°- 10°
[DPOS] -5°- 10°
machine reference position