Brother S-7000DD Service Manual page 15

Presser foot lifter and presser foot lifter pedal settings (050-)
Setting
No.
range
F050 ON/OFF
F051 ON/OFF
F055 ON/OFF
F057 ON/OFF
Initial Setting
value units
Forward treadle operation interlock during thread trimming
ON: Depressing treadle forward during thread trimming is disabled
ON -
OFF: Depressing treadle forward during thread trimming is enabled
Operation after knee switch is used to raise and lower presser foot.
ON: Presser foot can be raised and lowered by depressing the treadle
OFF -
OFF: Above operation is not possible.
Backward treadle operation when presser foot is lifted, or operation after
knee switch is operated
* This setting is only enabled when F851 is "ON" and F001 is "ON".
OFF -
ON: Presser foot does not lift when treadle is returned to neutral position.
OFF: Presser foot lifts when treadle is returned to neutral position.
Presser foot dropping when treadle is depressed forward to 1st step
* This is disabled when F852 is set to "OFF".
OFF -
ON: Presser foot is lowered.
OFF: Presser foot is not lowered.
2. FUNCTION SETTINGS (OPERATION PANEL)
(After the treadle is returned to the neutral position, depressing it
forward is enabled.)
backward.
S-7000DD
Setting details
(Continued on next page)
6