Brother S-7000DD Service Manual page 20

2. FUNCTION SETTINGS (OPERATION PANEL)
Panel operation settings (350-)
Setting
No.
range
F350 ON/OFF
0 - 10
F351
(seconds) (seconds)
F352 ON/OFF
F353 ON/OFF
F354 0 - 3
11
Initial Setting
value units
Buzzer (electronic sound) during panel operation
ON: Used
ON -
OFF: Not used
* The buzzer will always be ON when a warning or error is displayed.
Additional display time for model name when power switch is turned on
0: Not displayed
0 1 - 10: Model name is displayed for the amount of time set.
1
Limit for maximum speed setting in start and end backtacking speed
settings
ON: Limited by maximum sewing speed
ON -
OFF: Not limited by maximum sewing speed
End backtack sewing speed
ON: Separate setting from start backtack sewing speed is possible.
ON -
OFF: Setting for start backtack sewing is used.
Correction sewing function
* This is enabled when F500 is set to "1".
* Operates when the left-side correction (CORR) is set to "OFF" and the
right-side correction (CORR) is set to "ON".
0: Half stitch correction sewing / Single stitch correction sewing
1 1
1: No correction sewing / Single stitch correction sewing
2: Reverse correction sewing (reverse feed) / Single stitch correction
3: Single stitch operation after thread trimming (once only) / Single stitch
-[]030 specifications: "7030"
-[]03A specifications: "703A"
-[]05 specifications: "7050"
However, the setting upper limit will be limited by the setting value for
F184.
sewing
correction sewing
S-7000DD
Setting details