Brother S-7000DD Service Manual page 23

Standard device settings (500-)
Setting
No.
range
OFF/
F500
1 - 5
OFF/
F501
1 - 2
OFF/
F502
1 - 3
(*1) Functioning as a pleat presser sewing switch is enabled when F470 is set to "ON" and pattern 4 (pleat presser sewing) is
being sewn. However, when set to "2", the thread trimming switch function takes priority.
(*2) Functioning as a correction sewing switch is enabled when F470 is set to "ON" and pattern 4 (pleat presser sewing) is
being sewn.
(*3) To make it function as a thread trimming switch while sewing is in progress, F501 must be set to "2".
(*4) To make it function as a quick reverse switch while sewing is in progress, F501 must be set to "1".
(*5) Operation is enabled when F960 is set to "1". Functioning as a presser lifter switch is enabled when F960 is set to "1".
Initial Setting
value units
Actuator switch function when sewing is stopped (*1)
OFF: No operation
1: Correction sewing switch (*2)
1 1 2: Thread trimming switch (*3)
3: Cloth feed quick reverse switch (*4)
4: Work clamp lifter switch (alternate operation)
5: Work clamp lifter switch (momentary operation)
Actuator switch function during sewing (*1)
OFF: No operation
1 1
1: Manual backtack switch (*2)
2: Thread trimming switch (*2)
Presser foot lifter switch function
OFF: No operation
1 1 1: Presser foot lifter switch
2: Puller switch (alternate) (*5)
3: Puller switch (momentary) (*5)
2. FUNCTION SETTINGS (OPERATION PANEL)
Setting details
S-7000DD 14