Computer Operation - LifeSpan SP-710 Owner's Manual

6. COMPUTER OPERATION

BUTTON FUNCTION
MODE: Press the "Mode" button for mode selection. This button also functions as an enter
button during setup.
SET: To set the value of TIME, DISTANCE, CALORIES and PULSE. You can hold the button
down to increase the value quickly. (The computer must be in stop condition.)
RESET: The user may press the "RESET" button to reset each function: Time, Distance,
Calorie, Pulse. Hold this button down for 2 seconds for total reset. (If batteries are replaces, all
values will reset to ZERO automatically.)
RECOVERY: Enable the heart rate recovery function after training.
FUNCTIONS
SCAN: Cycles through all functions from TIME, DISTANCE, CALORIES, PULSE,
RPM/SPEED.
RPM: Displays the Rotation Per Minute. The RPM and SPEED will rotate every 6 seconds
after exercise starts.
SPEED: Displays current training speed. Maximum speed is 99.9 KM/H.
TIME: Accumulates total workout time when no value is preset. Time will count up from 00:00
to maximum 99:59.
Count down: Press the SET button to set a preset time between 0:00 to 99:50. Time will count
down from the preset time to 00:00.
15
SP-710