LifeSpan SP-710 Owner's Manual page 19

6. RECOVERY
a. Press the "RECOVERY" button to activate the RECOVERY function. In this
function, only PULSE and TIME will display whilst other functions will be inactive.
The Sensor Input will not be available.
TIME will start to count down from "00:60". The Pulse signal will blink according
to the user's pulse. When countdown reaches "0", it will show F1~F6.
b. The LCD will display as follows: (RECOVERY start condition & end condition)
F1 Outstanding
F2 Excellent
F3 Above Average
F4 Average
F5 Below Average
F6 Poor
19
SP-710