Assembly Instructions; Carriage Bolt - LifeSpan SP-710 Owner's Manual

4. ASSEMBLY INSTRUCTIONS

STEP 1: PREPARATION
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembly.
C. Before assembly please check whether all needed parts are available (at the above of this instruction
sheet you will find an exploded diagram with all single parts (marked with numbers) which this item
consists of.
STEP 2:
1. Attach the Front Stabilizer (pt.15) to the
Main Frame (pt.16) using two sets of
Ø10 Arc Washers (pt.5), M10 Domed
Nut (pt.6) and M10*90 Carriage bolt (3).
2. Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of
Ø10 Arc Washers (pt.5), M10 Domed
Nut (pt.6) and M8*90 Carriage bolt (3).
9
SP-710