Function Key; Programmable Key - CipherLab 9300 Reference Manual

1.3.4 FUNCTION KEY

The function key
combination is application-dependent.
1) To enable this modifier key, press
status bar.
2) Now press another key to get the value of key combination (say, press [1] to get the
value of F1). The icon will go off now.
3) To get the value of another key combination modified by the function key, repeat the
above steps.
4) To abort the key modification, press
Note: It is not necessary to hold down the function key.
Below is a list of the factory setting for a variety of key combinations.
Key Combination
,
,
,
,
Note: Press the function key first, and then press the second key for a specific function.

1.3.5 PROGRAMMABLE KEY

The following keys are user-definable. They can be re-defined as another key or to serve
as a shortcut key for launching a specific program. Refer to
Utility.
SCAN
Two side triggers on each side of the touch screen
START
Ctrl & Alt key
serves as a modifier key, and the functionality of each key
Action
Move text up one screenful (Page Up)
Move text down one screenful (Page Down)
Move to the beginning of screen or document (Home)
Move to the end of screen or document (End)
Chapter 1
on the keypad. Its icon
again, and the icon will go off.
Using 9300 Mobile Computer
will appear on the
7.2 Button Assignment
21