Using 9300 Mobile Computer; Battery - CipherLab 9300 Reference Manual

Windows ce 6.0; reads 1d and 2d barcodes
Hide thumbs Also See for 9300:
Table of Contents

Advertisement

USING 9300 MOBILE COMPUTER

This chapter explains the features and usage of 9300 Mobile Computer.
IN THIS CHAPTER
1.1 Battery..................................................................... 13
1.2 Memory.................................................................... 16
1.3 Keypad..................................................................... 18
1.4 Touch Screen ............................................................ 22
1.5 Notifications.............................................................. 24
1.6 Barcode Reader ......................................................... 25
1.7 Cradles .................................................................... 26
1.8 Battery Charger......................................................... 28

1.1 BATTERY

Main Battery
9300 Mobile Computer is powered by a rechargeable 3.7 V/2700 mAh Li-ion battery
pack, and it takes approximately 4 hours to fully charge it. However, the charging
time may vary by working condition. During normal operation, the mobile computer
can work for up to 10 hours.
Backup Battery
The backup battery on the main board takes charge when the main battery is
removed or drained out. When fully charged, the 3.6 V/15 mAh rechargeable Ni-MH
button cell helps retain data in SDRAM and maintain the system running in suspend
mode for at least half an hour without the main battery. In the meantime, you have
to replace the main battery as soon as possible.
Warning:
The battery cover must be in position; otherwise, the mobile computer
cannot turn on. For a new battery, make sure it is fully charged before use.
Always prepare a spare battery pack, especially when you are on the road.
Chapter 1
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9300 and is the answer not in the manual?

Table of Contents