Using Backups For Restore - CipherLab 9300 Reference Manual

9300 Mobile Computer

7.1.4 USING BACKUPS FOR RESTORE

After the backup operation, tap the Restore tab and it will automatically start scanning
for any .bkp files. Specify how to use these backups for automatic or manual restore
operation.
If a backup file has been selected for Auto Restore in your last operation, it will be
prefixed with an asterisk on the list.
File Manipulation
Tap [Refresh] to refresh the list of available backups. If a backup file is not desired
any more, select it and tap [Delete].
Auto Restore
Select a desired backup file from the list and tap [AutoRestore]. It will prefix an
asterisk to the selected file, indicating the specific file will be used in the restore
process that starts automatically right after a cold boot.
During Auto Restore, the slider position indicating the system storage space (Start |
Settings | Control Panel | System: Memory tab) will be automatically restored as
well.
Warning: For the Auto Restore setting to take effect, you must tap
toolbar to save the current settings and exit the application.
Manual Restore
Depending on specific requirements, you may perform a full or partial restore
manually.
112
Reference Manual
1
2
on the