CipherLab 9300 Reference Manual page 123

Full Restore Operation
1. Select a desired backup file from the list.
2. Tap [Restore].
3. Tap [Start] to run the restore process.
4. Once the restore process is completed, you will be asked to perform a warm boot. Tap
[No] if you wish to warm boot later. You may tap [Report] to view the log file if
necessary.
Partial Restore Operation
1. Double-tap a desired backup file from the list.
2. Select the desired items.
3. Tap [Restore].
4. Tap [Start] to run the restore process.
5. Once the restore process is completed, you will be asked to perform a warm boot. Tap
[No] if you wish to warm boot later. You may tap [Report] to view the log file if
necessary.
Warning: (1) You must perform a warm boot after the restore operation!
(2) You may encounter insufficient memory for the restore operation and
be asked to check memory space on the system (SDRAM), DiskOnChip or
SD/MMC/SDHC card. If you insist on restoring it without deleting files, data
loss or incomplete restore may occur.
Chapter 7 More Applications
113