CipherLab 9300 Reference Manual page 86

Windows ce 6.0; reads 1d and 2d barcodes
Hide thumbs Also See for 9300:
Table of Contents

Advertisement

9300 Mobile Computer
DFS Channels
Aggressive Scan
CCX features
WMM
Auth Server
TX Diversity
RX Diversity
Frag Thresh
76
Reference Manual
Default: Full
N/A
Aggressive scanning complements and works in conjunction with the
standard scanning that is configured through the Roam Trigger, Roam
Delta, and Roam Period settings. It is recommended that aggressive
scanning is enabled unless there is significant co-channel interference
because of overlapping coverage from APs that are on the same channel.
Value: On, Off
Default: On
Whether to allow the use of three CCX features (AP-assisted roaming,
AP-specified maximum transmit power, and radio management) —
Value: Optimized, Full, Off
Default: Optimized
Whether to allow the use of Wi-Fi Multimedia Extensions (WME) or not —
Value: On, Off
Default: Off
Type of authentication server being used for EAP authentication —
Value:
Type 1
Type 2
Default: Type 1
How to handle antenna diversity when transmitting data to AP —
Value:
Main Only
Aux Only
On
Default: On
How to handle antenna diversity when receiving data from AP —
Value:
Main Only
Aux Only
On-start on Main
On-start on Aux
Default: On-start on Main
If packet size exceeds threshold, then it is fragmented —
Value: 256 ~ 2346
Default: 2346 (bytes)
Cisco Secure ACS or another server that
uses PEAPv1 for PEAP with EAP-MSCHAPV2
(PEAP-MSCHAP)
A different authentication server, such as
Juniper Networks Steel Belted RADIUS, that
uses PEAPv0 for PEAP-MSCHAP
Use main antenna only
Use auxiliary antenna only
Use diversity
Use main antenna only
Use auxiliary antenna only
On startup, use main antenna
On startup, use auxiliary antenna

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9300 and is the answer not in the manual?

Table of Contents